TIG Welder II / Welder III
Read straight from Crane's careers page, verified 3d ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
Salary$26 – $34/hr
LocationJurupa Valley, California
Work modeon-site
Typefull-time
SeniorityMid
Experience2+ yrs
Company size1,001–5,000 people
PostedOct 13, 2026 · 3w ago
Verified live3d ago
At a glanceSummarised by Seekless from the posting.
Full penetration butt weld 6G test
Weld components in flat, vertical, or overhead positions
Operate safety equipment and use safe work habits
Ability to use arms and hands to signal, grab, hold, turn, push, and pull objects, materials, controls and tools
Ability and willingness to stand, walk, bend, squat and lift objects for long periods of time
Ability and willingness to lift and carry material weighing up to 50 lbs
Examine workpieces for defects and measure workpieces with straightedges or templates
Recognize, set up, and operate hand and power tools common to the welding trade
Weld using stainless steel and other alloys
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts
Select and install torches, torch tips, filler rods, and flux according to specifications
Ignite torches or start power supplies and strike arcs
Connect and turn regulator valves to activate and adjust gas flow and pressure
Determine required equipment and welding methods applying knowledge of metallurgy, geometry, and welding techniques
Monitor fitting, burning, and welding processes to avoid overheating or distortion
Operate manual or semi-automatic welding equipment (gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding)
Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets
Mark or tag material with proper job number, piece marks, and identifying marks
High School Graduate or GED equivalent
Minimum 2-5+ years of proven experience as a TIG Welder
Must be able to pass a 6G stainless steel pipe weld test
Experience using a variety of welding equipment and proper operating procedures (TIG, MMA, blow torch etc.)
Experience in using electrical or manual tools (saws, squares, calipers etc.)
Ability to read and interpret technical documents and drawings
Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
Valid California driver's license and an insured vehicle in good working order
Some college preferred
Professional Certification (e.g. an AWS welding certificate) will be a plus
May be required to work weekends and holidays as business necessitates
Benefits
Health insurance
401(k)
Paid time off
Tuition reimbursement
Responsibilities
•
Responsibilities/Duties:
•
Full penetration butt weld 6G test
•
Weld components in flat, vertical, or overhead positions.
•
Operate safety equipment and use safe work habits.
•
Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
•
Ability to use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools
•
Ability and willingness to stand, walk, bend, squat and lift objects for long periods of time
•
Ability and willingness to lift and carry material weighing up to 50 lbs
•
Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
•
Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
•
Weld separately or in combination, using stainless steel, and other alloys.
•
Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
•
Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
•
Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
•
Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
•
Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
•
Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
•
Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, and resistance welding.
•
Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
•
Mark or tag material with proper job number, piece marks, and other identifying marks as required.
•
Controlling Machines and Processes
•
Handling and Moving Objects
•
Identifying Objects, Actions, and Events
•
Operating Vehicles, Mechanized Devices, or Equipment
•
Communicating with Supervisors, Peers, or Subordinates
•
Getting Information
•
Performing General Physical Activities
•
Inspecting Equipment, Structures, or Material
•
Thinking Creatively
•
Training and Teaching Others
Requirements
•
Education, Work Experience, Skill Requirements & Certifications:
•
Minimum Education (or substitute experience) required:
•
High School Graduate or GED equivalent/Some college preferred.
•
REQUIRED Experience:
•
Minimum (2-5+) years of proven experience as a TIG Welder; MUST BE ABLE TO PASS A 6G STAINLESS STEEL PIPE WELD TEST
•
Experience using a variety of welding equipment and proper operating procedures (TIG, MMA, blow torch etc.)
•
Experience in using electrical or manual tools (saws, squares, calipers etc.)
•
Ability to read and interpret technical documents and drawings
•
Knowledge of relative safety standards and willingness to use protective clothing (face-shield, gloves etc.)
•
Skills Required:
•
Controlling operations of equipment or systems.
•
Watching gauges, dials, or other indicators to make sure a machine is working properly.
•
Conducting tests and inspections of products, services, or processes to evaluate quality or performance.
•
Determining the kind of tools and equipment needed to do a job.
•
Repairing machines or systems using the needed tools.
•
Minimum License, Certifications & Affiliations/Memberships and CEU’s
•
Valid California driver’s license and an insured vehicle in good working order.
•
Professional Certification (e.g. an AWS welding certificate) will be a plus.
Special Requirement:
•
May be required to work weekends and holidays as business necessitates; schedules will be determined by management with at least 48 hours advance notice.
•
Work Environment:
•
Working in the shop, the following conditions may apply:
•
Includes exposure to sounds and noise levels that are distracting or uncomfortable
•
Requires working in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures
Legal
This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.
Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.
About the company
About Crane: ChemPharma & Energy
Crane ChemPharma & Energy designs and manufactures a variety of high-performance products including highly engineered check valves, sleeved plug valves, lined valves, process ball valves, high-performance butterfly valves, bellows sealed globe valves, aseptic and industrial diaphragm valves, multi/quarter-turn valves, actuation, sight glasses, lined pipe, fittings and hoses, and air operated diaphragm and peristaltic pumps. Its trusted brands offer customers a complete and innovative product portfolio designed for the most demanding corrosive, erosive, and high purity applications. Primary industries served include chemical and petrochemical processing, biotechnology, pharmaceutical, and general industrial. As an integrated fluid handling solutions provider, Crane ChemPharma & Energy is well equipped to respond to complex global projects with comprehensive product packages and timely proposals to simplify our customers’ supply chain on a local level worldwide, at competitive market pricing.
#CPE
Benefits
Salary/Hourly Range: $25.75 to $34.24. Several factors contribute to actual salary, including experience in a similar role or performing comparable job responsibilities, skills, training, and other qualifications. Compensation packages also include comprehensive benefits, 401K contribution and match, Paid Time Off, paid holidays, tuition reimbursement and more. Some roles may be eligible for participation in performance-based bonus programs.
This description has been designed to indicate the general nature and level of work being performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job.
Crane Company. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, gender, sexual orientation, general identity, national origin, disability or veteran status.