Assistant Manager - EOL Testing and Maintenance
Read straight from Maxwell Energy System Pvt Ltd's careers page, verified 1d ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
LocationChhatrapati Sambhajinagar, Maharashtra, India
Work modeon-site
Typefull-time
SeniorityLead
Experience5+ yrs
DepartmentMXWL - Engineering
Company size51–200 people
PostedJul 20, 2026 · 3mo ago
Verified live1d ago
At a glanceSummarised by Seekless from the posting.
5+ years of hands-on experience in hardware test engineering, EOL/FCT development and maintenance, preferably in a production environment
Strong understanding of electronic circuits and the ability to read and troubleshoot complex schematics
Hands-on experience developing and maintaining automated test systems, fixtures and production test equipment
Strong experience with LabVIEW and/or Python for test automation
Experience defining test sequences, test cases, measurement methods, limits and pass/fail criteria
Experience with EOL/FCT test systems, test fixtures, instrumentation and production debugging
Strong understanding of interfaces such as CAN, UART, SPI, I²C and other commonly used electronic communication interfaces
Experience working directly with Production, Quality, Hardware and Firmware teams to resolve manufacturing and product issues
Strong troubleshooting and root-cause-analysis skills
Bachelor's degree in Electronics/Electrical Engineering (ECE/EEE) or equivalent practical experience
Experience with automotive electronics, BMS, EV chargers, motor controllers or other EV products
Experience developing test systems for high-volume manufacturing
Experience with NI hardware, DAQ systems, PXI/PXIe, switching matrices, electronic loads, power supplies and other automated test instrumentation
Experience with ICT, FCT, EOL and production validation methodologies
Familiarity with CAN tools and automotive diagnostic/testing protocols
Experience working with external test-fixture and automation vendors
Understanding of DFT (Design for Testability) and manufacturing test optimization
Experience in reducing test cycle time, improving first-pass yield and increasing test coverage
Skills
LabVIEW
Python
CAN
UART
SPI
I²C
NI hardware
DAQ systems
PXI/PXIe
switching matrices
electronic loads
power supplies
ICT
FCT
EOL
CANView
About the company
Maxwell Energy Systems is building the next generation of electronics for electric mobility, with products spanning Battery Management Systems (BMS), EV Chargers, Motor Controllers, DC-DC Converters and other automotive electronic systems.
About the role
We are looking for an Assistant Manager – End of Line Hardware Testing & Maintenance to lead our End-of-Line (EOL) and Functional Circuit Test (FCT) engineering activities at our Aurangabad manufacturing facility.
This role is ideal for an experienced test engineer who enjoys working at the intersection of electronics, automation, manufacturing and production engineering, and can take ownership of test systems from concept through commissioning and mass production.
What You’ll Do
•
Lead the EOL/FCT Test Engineering and Maintenance team and own the availability, performance and continuous improvement of production test systems.
•
Understand, maintain and continuously improve existing FCT, EOL and ICT test systems, fixtures, test masters and software.
•
Develop test strategies, test cases and test sequences for new electronic products in collaboration with Hardware, Firmware, Systems and Manufacturing teams.
•
Design test-system architecture, including test fixtures, electrical interfaces, instrumentation, switching, communication and safety mechanisms.
•
Design and develop automated test fixtures and jigs for EOL and functional testing of automotive electronic products.
•
Define test protocols, hardware connections, measurement methods and acceptance criteria based on product requirements and specifications.
•
Automate test processes using Python, LabVIEW or equivalent programming environments.
•
Work with external test-fixture and equipment suppliers to develop, commission and qualify production test systems.
•
Take ownership of test engineering activities across the product lifecycle, from Design Verification Planning through Start of Production (SOP) and mass production.
•
Ensure timely commissioning, validation and release of test equipment, fixtures and software for production.
•
Provide hands-on technical support to Production for test failures, intermittent issues, equipment downtime and product-related problems.
•
Perform structured test failure analysis and root-cause investigation, working with Hardware, Firmware, Quality and Manufacturing teams.
•
Develop and maintain CAN-based test and diagnostic tools/software, including CANView and related production utilities.
•
Maintain and improve test masters, test specifications, calibration requirements, software and documentation for FCT/EOL systems.
•
Identify opportunities for test automation, cycle-time reduction, cost reduction, yield improvement and increased test coverage.
•
Participate in component and product design reviews to ensure testability and manufacturability are considered from the beginning of the design.
•
Mentor and coach junior engineers on FCT/EOL development, debugging, automation and maintenance.
Must-Have Requirements:
•
5+ years of hands-on experience in hardware test engineering, EOL/FCT development and maintenance, preferably in a production environment.
•
Strong understanding of electronic circuits and the ability to read and troubleshoot complex schematics.
•
Hands-on experience developing and maintaining automated test systems, fixtures and production test equipment.
•
Strong experience with LabVIEW and/or Python for test automation.
•
Experience defining test sequences, test cases, measurement methods, limits and pass/fail criteria.
•
Experience with EOL/FCT test systems, test fixtures, instrumentation and production debugging.
•
Strong understanding of interfaces such as CAN, UART, SPI, I²C and other commonly used electronic communication interfaces.
•
Experience working directly with Production, Quality, Hardware and Firmware teams to resolve manufacturing and product issues.
•
Strong troubleshooting and root-cause-analysis skills.
•
Bachelor’s degree in Electronics/Electrical Engineering (ECE/EEE) or equivalent practical experience.
Nice to Have:
•
Experience with automotive electronics, BMS, EV chargers, motor controllers or other EV products.
•
Experience developing test systems for high-volume manufacturing.
•
Experience with NI hardware, DAQ systems, PXI/PXIe, switching matrices, electronic loads, power supplies and other automated test instrumentation.
•
Experience with ICT, FCT, EOL and production validation methodologies.
•
Familiarity with CAN tools and automotive diagnostic/testing protocols.
•
Experience working with external test-fixture and automation vendors.
•
Understanding of DFT (Design for Testability) and manufacturing test optimization.
•
Experience in reducing test cycle time, improving first-pass yield and increasing test coverage.
Why Maxwell?
Benefits
At Maxwell, you will work directly on production hardware used in real electric vehicles and play a critical role in ensuring that every product leaving our manufacturing line meets its required quality and performance standards.
You will have the opportunity to build and improve the complete hardware testing and automation ecosystem, while working closely with Product Development, Manufacturing, Quality and external technology partners.
If you are someone who can own a test system end-to-end, solve difficult production problems and build scalable automated testing solutions, we’d like to hear from you.
More roles at Maxwell Energy System Pvt Ltd