Senior Electrical Engineer
Read straight from PDW's careers page, verified 1d ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
LocationHuntsville, AL
Work modeon-site
Typefull-time
SenioritySenior
Experience3–5 yrs
DepartmentEngineering
Company size201–500 people
First seenOct 26, 2026 · 1w ago
Verified live1d ago
At a glanceSummarised by Seekless from the posting.
3-5 years professional Hardware Engineering experience
Bachelor's degree in Electrical Engineering
Proficient skills in Altium Designer
Extensive knowledge of electronic hardware and system design
Experience with controlled impedance, length matching, and/or high speed signaling
Experience with MIPI-CSI, MIPI-DSI, Gigabit Ethernet and other high speed signals
Experience with high power systems; including strong understanding of circuit design constraints inside these systems
Knowledge of common communication buses such as I2C, CAN, Serial, and SPI – along with their debugging procedures
Ability to create PCB stack ups optimized for power distribution and noise reduction
Experience developing custom Altium jobs, Draftsman fabrication, and assembly documents
Proficiency in MS Office tools, including Project
Experience in UAV aircrafts, robotics development, and/or hobby drones
Must be eligible to obtain and maintain a U.S. Secret security clearance or higher
Skills
Altium Designer
controlled impedance
length matching
high speed signaling
MIPI-CSI
MIPI-DSI
Gigabit Ethernet
I2C
CAN
Serial
SPI
high power systems
custom Altium jobs
Draftsman fabrication
assembly documents
MS Office
Project
PCB stack up optimization
Benefits
Health insurance
Dental insurance
Vision insurance
401(k)
Paid parental leave
On site gym
Life insurance
Employee assistance program
PTO
Flexible leave
About the role
Now, we’re entering a new phase of growth and are looking for a Senior Electrical Engineer to join our team, contributing to the next wave of system and tool development for our upcoming product lines. The successful candidate will play a pivotal role in assisting in architectural design, parts selection, validation test design, and overseeing hardware and software development cycles for a variety of sUAS systems.
What You’ll Do
•
The ideal candidate will thrive working in an innovative and fast-paced work environment, able to deal with problems on the fly, and delivers thoughtfully designed and highly adaptable systems.
•
Perform electrical design tasks such as schematic capture, schematic review, layout, layout review, architecture design and parts selection.
•
Work together with the Hardware team to develop trajectories for our hardware projects.
•
Develop testing criteria, plans and test fixtures for design verification and production certification.
•
Generate engineering-grade reports, perform part cost analysis, and define part performance measurement criteria.
•
Assist in the identification and implementation of process improvements.
•
Collaborate with a strong engineering team and company stakeholders.
Requirements
•
3-5 years professional Hardware Engineering experience and/or bachelor’s degree in Electrical Engineering.
•
Proficient skills in Altium Designer.
•
Extensive knowledge of electronic hardware and system design.
•
Experience with controlled impedance, length matching, and/or high speed signaling.
•
Experience with MIPI-CSI, MIPI-DSI, Gigabit Ethernet and other high speed signals.
•
Experience with high power systems; including a strong understanding of circuit design constraints inside these systems.
•
Knowledge of common communication buses; such as I2C, CAN, Serial, and SPI – along with their debugging procedures.
•
Ability to create PCB stack ups that are optimized for power distribution and noise reduction.
•
Experience developing custom Altium jobs, Draftsman fabrication, and assembly documents.
•
Proficiency in MS Office tools, including Project.
•
Must be eligible to obtain and maintain a U.S. Secret security clearance or higher, as required.
Preferred
•
Experience in UAV aircrafts, robotics development, and/or hobby drones
Physical Requirements
The physical demands described here are representative of those that must be met to successfully perform the essential functions of the job. Ability to sit, stand, bend, reach, climb, and move about regularly throughout the day and lift / carry up to 50 pounds. Must have manual dexterity to operate electronic test and fabrication equipment as well as standard office equipment. Must be physically capable of tolerating loud noise, heat, cold, dust, or chemicals (with PPE).
Work Environment
This position typically operates in a standard office setting and manufacturing environment. This role requires use of standard office equipment and may involve exposure to loud noise, heat, cold, dust, or chemicals (with PPE) and may require occasional travel to test sites/customer locations/supplier facilities. This position may have exposure to outdoor weather conditions, noise, and non-climate-controlled environments. May require the use of personal protective equipment (PPE) depending on the environment. This is a fast-paced work environment and requires cross-departmental collaboration with independent and team-based responsibilities. Standard work hours for this position are 8:30am-5:00pm with occasional overtime as operational needs demand.
Benefits
PDW values our team, and we offer a compensation package reflective of your experience and capabilities. Benefits include:
•
Comprehensive BCBS medical, dental, and vision coverage; 80% sponsored by the company.
•
Safe Harbor 401(K) with company match.
•
Paid Parental Leave.
•
On-site gym at Huntsville, AL & Denver, CO locations.
•
Employer provided life insurance.
•
Robust Employee Assistance Program (EAP).
•
A work environment that encourages teamwork and innovation.
•
Competitive salary, generous paid time off (PTO), and flexible leave options.
EEO Statement
PDW is an equal opportunity employer that upholds all federal and state non-discrimination laws. We ensure a fair and unbiased evaluation for employment for all qualified candidates regardless of race, color, religion, age, sex, sexual orientation, gender identity, national origin, marital status, medical condition, disability, genetic information, veteran status, or any other characteristic protected by law.
About the company
Performance Drone Works (PDW) is building the next generation of tactical robotic systems used across defense, national security, and public safety missions. We are building a new center of engineering excellence to design our new category of tactical robotic systems and the industrial capacity to deliver them, bringing decisive airpower into the hands of every operator. We are not here to make promises; we are here to deliver real systems with real capabilities for real missions.
You will join a team of operators, engineers, and builders who solve hard problems with humility and focus. We design and produce multi-mission aerial systems that operators trust to perform in real-world conditions, reliably, repeatedly, and at scale. Our approach is grounded in operator-centered design, rapid iteration from field use, and U.S.-based manufacturing. We operate by a clear set of values: Mission First, Aim Farther, Own It, Win Together. This is how we build advantage and how we help protect our service members, our communities, and our country.