Assembly Technician
Read straight from AIM's careers page, verified 2d ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
Salary$40k – $75k
LocationSeattle
Work modeon-site
Typefull-time
SeniorityEntry
Experience1+ yrs
DepartmentEngineering
Company size201–500 people
PostedSep 29, 2026 · 1mo ago
Verified live2d ago
At a glanceSummarised by Seekless from the posting.
High school diploma or equivalent
1+ years of hands-on assembly or mechanical/electrical work experience
Ability to read and follow assembly drawings, schematics, and work instructions
Mechanical and electrical assembly to drawing/spec, including fastener installation to torque values and structural fit-up/alignment
Reading and working directly from assembly drawings, schematics, and work instructions without hand-holding
Setting up and running functional tests — instrumentation, execution, data capture — and interpreting pass/fail results
Diagnosing and correcting an assembly defect (not just reporting it) — rework, re-fit, re-assembly
2+ years hands-on experience in electro-mechanical, precision, or high-volume manufacturing
Familiarity with IPC-A-610 acceptance standards for electronic assemblies
Experience with electrical wiring and basic wire harness installation
Experience setting up and running functional tests or experiments
Associate degree in a technical field
Skills
IPC-A-610
About the company
AIM builds autonomy for the real world - robots that move mountains. Our systems fuse software, hardware, robotics, and mission-critical infrastructure into ruggedized, safety-critical machinery operating on jobsites across the world. We replace decades of manual, error-prone, high-risk work with intelligent machines that reshape how earthmoving is done.
About the role
Perform mechanical and electrical assembly of components, sub-assemblies, and full structure integrations across AIM’s hardware programs — from small electrical sub-assemblies through PCB integration to final unit build-up and functional test.
Responsibilities
•
Perform mechanical and electrical assembly of components, sub-assemblies, and final structure integrations per engineering drawings and work instructions.
•
Assemble PCB assemblies into product enclosures; install wire harnessing, cables, and components.
•
Install fasteners, brackets, and hardware to specified torque values; verify structural mounting and alignment.
•
Use precision hand tools, power tools, torque wrenches, and calibrated measuring instruments for assembly and inspection.
•
Set up and conduct functional testing of built hardware — instrumentation setup, test execution, data capture, and teardown.
•
Read and interpret layout drawings, mechanical drawings, assembly procedures, schematics, engineering drawings, and parts lists.
•
Identify and troubleshoot assembly defects; perform rework and re-assembly to correct non-conformances.
•
Support development of prototype test capabilities for manufactured components and life tests.
•
Maintain a clean, organized, and safety-focused work area; follow all safety procedures and PPE requirements.
Requirements
•
High school diploma or equivalent.
•
1+ years of hands-on assembly or mechanical/electrical work experience.
•
Ability to read and follow assembly drawings, schematics, and work instructions.
Preferred Skills and Experience
•
2+ years hands-on experience in electro-mechanical, precision, or high-volume manufacturing.
•
Familiarity with IPC-A-610 acceptance standards for electronic assemblies.
•
Experience with electrical wiring and basic wire harness installation.
•
Experience setting up and running functional tests or experiments.
•
Associate degree in a technical field.
•
Comfort working in a fast-paced, low-volume/high-mix production environment with shifting priorities.
Physical Requirements
•
Ability to work at a bench or on a vehicle/structure for extended periods.
•
Ability to lift up to 30 lbs and maneuver components with hand trucks or pallet jacks as needed.
•
Good vision and hand-eye coordination for detailed assembly work.
Hard skills
1.
Mechanical and electrical assembly to drawing/spec, including fastener installation to torque values and structural fit-up/alignment.
2.
Reading and working directly from assembly drawings, schematics, and work instructions without hand-holding.
3.
Setting up and running functional tests — instrumentation, execution, data capture — and interpreting pass/fail results.
4.
Diagnosing and correcting an assembly defect (not just reporting it) — rework, re-fit, re-assembly.
AIM-specific attributes
1.
Comfort with ambiguity — AIM’s build documentation and BOMs change week to week as programs go through revisions; the technician has to build correctly today and adapt tomorrow without a finished, static work instruction.
2.
Safety-first mindset — works around powered tools, heavy structures, and electrical systems; stops and flags rather than pushing through an unsafe condition to hit a deadline.
3.
Ownership of outcomes — treats an assembly with their name on it as their responsibility through test, not just through build.
4.
Low-volume/high-mix tolerance — comfortable switching between assembly types and revisions within a shift rather than expecting long, repetitive runs.
Compensation - $40,000-$75,000 base salary