PAINTING WORKER (T32)
Read straight from Army National Guard Units's careers page, verified 5h ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
LocationCullman, Alabama, United States
Work modeon-site
Typefull-time
SeniorityEntry
Company size10,000+ people
PostedOct 29, 2026 · 1w ago
Verified live5h ago
At a glanceSummarised by Seekless from the posting.
General experience: knowledge of surface preparation, coating methods, and coating materials
Ability to use tools and equipment associated with the painting trade and to read and interpret directions
Specialized experience: knowledge of standard surface preparation and coating methods and techniques
Skill to sand, wire brush, scrape, spackle, putty surfaces and select appropriate tools
Skill to brush on, roll on, and spray coating materials, and apply other related methods and techniques
Experience interpreting and following technical orders, specifications, and publications
Knowledge of standard and accepted surface preparation and coating methods and techniques to apply coatings to stationary and mobile equipment, and to combat, tactical, and commercial vehicles
Ability to prepare coating materials by tinting, toning, etching, blending, and mixing in various additives
Knowledge of coating materials so that surfaces are free from skips, runs, and drips
Ability to read and apply directions that relate to the mixture, use, and application of various kinds of coating materials, solvents, etc.
Skill in using tools and equipment such as scrapers, wire brushes, putty knives, sandpaper, paintbrushes, rollers, and spray guns
Membership in a compatible military grade in the Alabama Army National Guard
Minimum military rank: SGT
Maximum military rank: SFC
Male applicants born after 12/31/1959 must be registered under the Military Selective Service Act
Benefits
Recruitment or relocation incentive
Summary
THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.
This National Guard position is for a PAINTING WORKER (T32), Position Description Number D1217000 and is part of the AL CSMS 2, National Guard.
About the company
ORGANIZATION: AL CSMS 2, CULLMAN, AL
SELECTING OFFICIAL: MSG P. JONES
Duties
(1) Prepares surfaces (i.e., metal, wood and glass) by removing rust, paint, and loose particles. Sands and evens out dents and scars to assure a smooth and level surface using sanders, scrapers, sandpaper, wire brushes, and paint remover. Applies coatings to specified areas ensuring that that surfaces are free from skips, runs, and drips. Applies rustproof compound to areas such as splash panels, quarter panels, seams structural members, and underbody construction. Applies coatings using brushes, rollers, and spray paint equipment.
(2) Prepares coating materials by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives). Applies prime, intermediate and final coats of semi-gloss, gloss and other paint, lacquer, enamel, varnish and shellac. Ensures that match, texture and appearance meet finish requirements. Replaces and applies markings/lettering as specified by appropriate manuals
(3) Reads and interprets directions that relate to mixture, use, and application of various kinds of coating materials, solvents, and precoating agents.
(4) Applies Chemical Agent Reactive Coating (CARC) materials in accordance with specifications and dimensions. Cleans and maintains painting equipment.
(5) Performs other duties as assigned.
Qualifications
MILITARY REQUIREMENTS: This is an excepted service position that requires membership in a compatible military grade in the Alabama Army National Guard. Applicants who are not currently a member of the Alabama Army National Guard must be eligible for immediate membership. If you are not sure you are eligible for military membership, please contact an Alabama Army National Guard recruiter at 800-464-8273 prior to applying for this position.
**MINIMUM MILITARY RANK: SGT
MAXIMUM MILITARY RANK: SFC
EXPERIENCE REQUIREMENTS: Each applicant must fully substantiate (in his/her own words) that he/she meets the requirements of the Specialized Experience listed below: Otherwise, the applicant will be considered unqualified for this position. DO NOT COPY THE VACANCY ANNOUNCEMENT OR THE POSITION DESCRIPTION. DOING SO MAY RESULT IN DISQUALIFICATION FOR THE POSITION.
GENERAL EXPERIENCE**: Experience or training which demonstrates the candidate’s knowledge of surface preparation (removal of rust, dirt, paint, etc.); coating methods (brushing, rolling, and spraying); and coating materials (paints, varnishes, shellacs, etc.). Must have the ability to use tools and equipment associated with the painting trade and to read and interpret directions.
SPECIALIZED EXPERIENCE: Experience or training which demonstrates the candidate’s knowledge of standard surface preparation and coating methods and techniques. Experience must demonstrate the skill to sand, wire brush, scrape, spackle, putty, prep surfaces and select appropriate tools to complete assigned tasks. Experience must also demonstrate the skill to brush on, roll on, and spray coating materials, and apply other related methods and techniques, such as cutting-in techniques and dip and overflow methods. Experience which required the applicant to interpret and follow technical orders, specifications, and publications.
SKILL AND KNOWLEDGE:
– Knowledge of standard and accepted surface preparation and coating methods and techniques to apply coatings to stationary and mobile equipment, and to combat, tactical, and commercial vehicles. Skill to remove rust, paint, and loose particles from surfaces so that coating materials will adhere properly.
– Ability to prepare coating materials by tinting, toning, etching, blending, and mixing in various additives (i.e., retardants, hardeners, drying agents, and other additives).
– Knowledge of coating materials so that surfaces are free from skips, runs, and drips. Skill to sand, wire brush, scrape, spackle, and putty surfaces; to brush on, roll on, and spray coating materials; and to apply other related methods and techniques.
– Ability to read and apply directions that relate to the mixture, use, and application of various kinds of coating materials, solvents, etc.
– Skill in using tools and equipment such as scrapers, wire brushes, putty knives, sandpaper, paintbrushes, rollers, and spray guns.
Education
SUBSTITUTION OF EDUCATION IS NOT CONSIDERED FOR WAGE GRADE POSITIONS.
How you will be evaluated
Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.
Required documents
To apply for this position, you must submit a complete Application Package which includes:
1.
Your resume showing work schedule, hours worked per week, dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.) of employment and duties performed.
2.
Other supporting documents: SF-50s and DD 214s are recommended, but not required.
How to apply
To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/13104290
A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration.
To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application.
Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process.
After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process.
You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application.
To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/.
Other information
Legal
If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (https://www.sss.gov/RegVer/wfRegistration.aspx).
**This position may be authorized a recruitment or relocation incentive for up to 25%. All incentives must be approved prior to the employee in processing.**