QC Inspector - Piping - Project
Read straight from ABIS's careers page, verified 1d ago.Seekless can tailor your résumé to it.
Seekless can write your résumé for this posting first.
Before you apply
LocationAl Jubail, Eastern Province, Saudi Arabia
Work modeon-site
Typefull-time
SeniorityMid
Experience5–8 yrs
DepartmentAbis_PS
Company size501–1,000 people
PostedSep 14, 2026 · 1mo ago
Verified live1d ago
At a glanceSummarised by Seekless from the posting.
Perform in-process and final inspections on piping fabrication and installation works
Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP
Verify pipe fit-up, alignment, and welding against approved isometrics and WPS
Verify materials, spools, and fittings against material certificates and specifications
Record inspection results and raise Non-Conformance Reports as required
Coordinate hold points and inspections with client/third-party inspectors
Maintain inspection records, checklists, and daily QC reports
Verify calibration status of measuring and test equipment used on site
Support punch-list generation and verification of closure for piping works
Ensure work fronts comply with approved method statements and piping codes (ASME B31.3)
Support preparation of quality documentation for piping handover dossiers
5–8 years of experience as a QC Inspector on piping construction/fabrication projects
Diploma or Bachelor's degree in Mechanical Engineering
QC/inspection certification (e.g., CSWIP, CWI) preferred
Skills
ASME B31.3
SECTION I: Job Summary
The QC Inspector – Piping performs inspection and testing of piping fabrication and installation activities to verify compliance with isometrics, welding procedures, and applicable codes and standards.
SECTION II: Job Analysis
Duties & Responsibilities
· Perform in-process and final inspections on piping fabrication and installation works.
· Witness hydrotests, NDE activities (RT/UT/PT/MT), and other required tests per the ITP.
· Verify pipe fit-up, alignment, and welding against approved isometrics and WPS.
· Verify materials, spools, and fittings against material certificates and specifications.
· Record inspection results and raise Non-Conformance Reports as required.
· Coordinate hold points and inspections with client/third-party inspectors.
· Maintain inspection records, checklists, and daily QC reports.
· Verify calibration status of measuring and test equipment used on site.
· Support punch-list generation and verification of closure for piping works.
· Ensure work fronts comply with approved method statements and piping codes (ASME B31.3).
· Support preparation of quality documentation for piping handover dossiers.
Requirements
SECTION III: Performance Indicators
Evaluated Based on • Inspection accuracy and completeness
• Timely identification and reporting of non-conformances
• First-time weld/inspection acceptance rate
• Adherence to inspection schedules/hold points
• Quality of inspection documentation
SECTION IV: Required Skills & Abilities
Core Competencies • Attention to Detail
• Integrity
• Analytical Thinking
• Communication Skills
• Time Management
Technical Skills • Piping Inspection Techniques
• Reading Isometrics, P&IDs & Welding Maps
• Welding Inspection & NDE Awareness (RT/UT/PT/MT)
• Inspection & Test Plans (ITPs)
• Measuring & Testing Equipment Use
• QC Documentation & Reporting
SECTION V: Required Experience and Education
Experience • 5–8 years of experience as a QC Inspector on piping construction/fabrication projects.
Education • Diploma or Bachelor’s degree in Mechanical Engineering.
• QC/inspection certification (e.g., CSWIP, CWI) preferred.
SECTION VI: LEVEL OF AUTHORITY
Supervisory / Managerial: No supervisory responsibility.
Financial: No financial or budget authority.
SECTION VII: MISCELLANEOUS JOB-SPECIFIC REQUIREMENTS
General Profile / Specifications: • Field-based role requiring daily presence on active piping work fronts
• Exposure to site/construction conditions
• May require shift work or extended hours to cover inspection hold points
More roles at ABIS